Welding Equipments

Product Details:

We are offering Welding cables. This product is suitable for the welding machine whose voltage to the ground is not more than 200 V and pulsating current value is 400 V.  16 sq mm, 25 sq mm, 35 sq mm, 50 sq mm, 70 sq mm, 95 sq mm, 120 sq mm

Additional Information:

• Delivery Time: Ready stock

Product Details:

We are Leading Trader of Welding Holder to our client.

Additional Information:

• Item Code: EH-07
• Delivery Time: Ready stock

Product Details:

An electrode is an electrical conductor used to make contact with a nonmetallic part of a circuit (e.g. a semiconductor, an electrolyte, a vacuum or air)

Additional Information:

• Delivery Time: Ready stock

Product Details:

An electrode is an electrical conductor used to make contact with a nonmetallic part of a circuit (e.g. a semiconductor, an electrolyte, a vacuum or air).

Additional Information:

• Item Code: 6013
• Delivery Time: Ready stock
• Packaging Details: esab superon welding electrode comes in box containing 510 electrode per box

Product Details:

We are trading a range of Welding Hand Gloves which are made with qualitative soft leather. Our fully lined welding gloves are chemically treated and perfectly finished. These are strong and thick which protect the workers from hazards and give complete protection to the hands.

Additional Information:

• Item Code: leatherhandglooves
• Delivery Time: Ready stock

Product Details:

We are Leading Trader of ESAB Rupatam Flux.

Features:

• Rupatam 14 is used for obtaining strong, clean and high tensile brazed joints in brasses, bronzes. It also effectively joins silver and molybdenum
• It is not recommended for ferrous metals or alloys of high nickel content due to the possibility brittle phosphide formation
• Flame should be slightly oxidizing on Cu and neutral on Cu alloys
• The deposit obtained has a high tensile strength

 

Applications:

• Extensive employment of the alloy in electrical engineering for joints in motor windings, wires, and cables, braided conductor and other conductor assemblies where any risk of corrosion by flux constituents must be avoided

Additional Information:

• Delivery Time: Ready stock

Product Details:

A welding helmet is a type of headgear used when performing certain types of welding to protect the eyes, face and neck from flash burn, ultraviolet light, sparks, infrared light, and heat.

Additional Information:

• Delivery Time: Ready stock

Product Details:

We are Leading Trader of Welding Filler Wires. Consistent wire diameter is critical to ensure proper current passage from the contact tip to the wire.

Additional Information:

• Delivery Time: Ready stock
• Packaging Details: comes in a box containing 5kg material

Product Details:

We are Leading Trader of Ador Welding Electrode.An electrode is an electrical conductor used to make contact with a nonmetallic part of a circuit (e.g. a semiconductor, an electrolyte, a vacuum or air). 

Additional Information:

• Delivery Time: Ready stock

Product Details:

OK, Flux 10.71 is an agglomerated, basic flux for submerged arc welding. It is used for single and multi-run welding of all plate thicknesses. It can be combined with a wide range of solid wires and cored wires and thus it is suitable for all kinds of steels. OK, Flux 10.71 combines good toughness values with excellent weldability. It is used for single and multiwire procedures such as tandem, twin-arc, tandem-twin welding and many more, for butt, overlap and fillet welds. It works equally well on DC and AC current. The good slag detachability and limited alloying of Si and Mn make it well suited for multi-pass thick section welding. High welding speeds can be achieved producing a finely rippled weld metal, all this in combination with very good impact values. In general construction, OK Flux 10.71 is one of the most used SAW fluxes. Not just for structural steels and fine-grained steels, but also for weather-resistant steels e.g. for bridges. Pressure vessels are welded with this flux because it can be used for a wide range of steels including low-temperature steels. This reduces the number of different fluxes a customer needs to have in stock. Wind tower production with plate thicknesses of greater than 50 mm requires not only excellent slag detachability, particularly in the first run, and high deposition rates in all following runs, but also excellent toughness values. Since OK Flux 10.71 offers all this it is well established in this market segment. Other applications are in shipbuilding with approvals or in the production of pipes with steels up to X70 strength level. OK, Flux 10.71 can also be combined with a number of SAW cored wires in order to increase the productivity and the mechanical properties of the weld metal.

Specifications: